ALPHASONIK V1200.1D

ALPHASONIK

(1200.1D) VENUM SERIES 2400 WATTS MAX MONOBLOCK CAR AMP WITH POWER PLANT CHIP 4-WAY PROTECTION CIRCUITRY 1-CHANNEL SUBWOOFER CLASS-D AMPLIFIER WITH REMOTE BASS BOOST CONTROL KNOB INCLUDED

The V1200.1D Monoblock Alphasonik Class D Amplifier Alphasonik's VENUM seriescombines technology, power, and value for great sound and great power. Featuring a die-cast aluminum heatsink to dissipate heat from critical components with a double-sided glass FR4 epoxy circuit board, 4-way protection circuitry, and RCA outputs, the Venum Series offers you a complete audio experience that will enhance your set up for years to come.

MIL SPEC DOUBLE-SIDED GLASS EPOXY FR4 CIRCUIT BOARD EQUIPPED

A double-sided PCB has been utilized in our Class D amplifiers to optimize the voltage currents and minimizing the footprint of the circuitry. By doing this we can reduce the introduction of alternator noise and to maximize the features and accommodate ALPHASONIK'S POWER PLANT (APP) to increase wattage output. But we did not stop there! We also incorporated FR4 glass-reinforced epox

EXTRUDED ALUMINUM HEATSINK EQUIPPED

Keeping the amplifier cool increases efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.

NICKEL PLATED TERMINAL BLOCK EQUIPPED

The VENUM Series amplifiers is equipped with nickel plated terminal blocks. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.

REMOTE BASS KNOB INCLUDED

External bass controller that will allow you to adjust the bass level remotely without having to retune the amplifier. This is a perfect solution to increase and decrease the bass when you have a wide variety of music genres. Giving you the ability to adjust the bass song by song.

FEATURES:

• 1 x 300W @ 4Ohms
• 1 x 600W @ 2 Ohms
• 1 x 1200W @ 1 Ohms
• 2400 Watts Max Power
• Nickel plated terminals
• Low level inputs
• Remote bass knob included
• Variable bass boost: 0db -+12dB
• Mil spec single-sided glass epoxy FR circuit board
• 4 Way protection circuitry: Thermal, short circuit, overload and DC offset
• Variable low pass crossover: 40Hz-300Hz
• Variable input sensitivity: 200mV-6V
• Variable Subsonic Filter: 10Hz-40Hz
• Frequency Response: 10Hz - 300KHz
• 45Hz Bass Boost: 0-12dB
• S/N Ratio: >95dB
• THD: 0.10%

DIMENSIONS:

• (WxHxL) 9.2" x 2.3" x 11.2"