ROCKFORD FOSGATE
(P300X2) PUNCH 300 WATT 2-CHANNEL AMPLIFIER
The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.
The P300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
FEATURES:
- High level input capable with Auto Turn-On circuit
- 12dB/octave Butterworth crossover
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- RCA pass-thru outputs
- On-board Punch EQ with +18dB boost @ 45Hz
- Cast aluminum heatsink
- Muted turn on
- Stealth top mounted control panel
- Short circuit protection
- Over current protection
TECHNOLOGIES:
-
CE Compliant: This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
-
CTA-2006 Compliant: Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
-
TRANS•ana: Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
-
Balanced Differential Inputs: Differential inputs eliminate noise picked up by signal cables.
-
DTM: Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
-
DSM: DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
-
MEHSA3: MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
-
NOMAD: NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
-
Engineered In The USA: These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
-
C.L.E.A.N. Set-Up: C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.
SPECIFICATIONS:
- Cta-2006 Compliant:
- Number of Channels: 2
- Total Power (Sum of Rated Power): 300 Watts
- Rated Power (RMS Continuous Power)
- 100 Watts x 2 @ 4-Ohm
- 150 Watts x 2 @ 2-Ohm
- 300 Watts x 1 @ 4-Ohm Bridged
- Dynamic Power (PVC/PowerCube®)
- 120 Watts x 2 @ 4-Ohms 0° Res
- 203 Watts x 2 @ 2-Ohms 0° Res
- Bridgeable: Yes
- Frequency Response: 20Hz-20kHz
- Input Sensitivity: 150 mV - 12 V
- Circuit Topology Class: Class A/B
- Efficiency (average): 69% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise)
- 4-Ohm: <1.0%
- 2-Ohm: <1.0%
- Signal Input: Hi/Low Level: 1 RCA Pair
- Signal Output: Low Level: 1 RCA Pair
- Tone Controls
- 0dB to +14dB @ 12.5kHz
- 0dB to +18dB @ 45Hz
- Crossover Controls
- High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
- Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
- All-Pass: Yes
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators:
- Power/Protect/Thermal LED
- Input Clip LED3
- Output Clip LED1,2,3
- LED Color Legend:
-
1BLUE: <0.5% THD
-
2VIOLET: 1% THD
-
3RED: 10%+ THD
- Power Wire Gauge: 8 AWG to 4 AWG
- Power Input Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Speaker Output Connector: Captive C-Clamp
- Cooling: Convection
- Heatsink: -
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 50 A
- Average Current Draw (13.8V Music): 23 A
- Max. Current Draw (13.8V Sinewave): 45 A
- Suggested Alternator: 75 A
- Included In The Box: -
- Dimensions (H x W x D): 2.38 x 7.76 x 9.86 (in) 6.05 x 19.71 x 25.04 (cm)
- Shipping Weight: 9.5 Lbs. (4.3 Kg.)